<div><img src="https://skillset.s3.amazonaws.com/img/question/52897/5564ebfb-ee20-4805-a29c-76feac1f0974" /></div> Refer to the exhibit. A network administrator configures an Access Control List to deny web access for a certain part of the network. For some reason the configuration is blocking all the traffic from the subnet. **Which of the following commands can be used on the interface to stop this problem from happening?**

Refer to the exhibit. A network administrator configures an Access Control List to deny web access for a certain part of the network. For some reason the configuration is blocking all the traffic from the subnet.
Which of the following commands can be used on the interface to stop this problem from happening?

no access-group 120 in

no access-list 120

no ip access-class 120

no access-list 120 out

no ip access-group 120 out

Explanation

The correct way to remove an ACL from an interface is with the command "no ip access-group in|out". The command "no ip access-list " is used to remove the access list from the console line, in case is applied to Telnet. For more information refer to: http://www.cisco.com/c/en/us/support/docs/security/ios-firewall/23602-confaccesslists.html / - - - - - - - Not shown here, but the best guess is that they really want to remove the current ACL#120 with: "NO's", and then put the first line back in, and on the second line change deny to permit