Skillset can help you prepare! Sign up for your free Skillset account and take the first steps towards your certification.
Refer to the exhibit. A sudden network connectivity issue has been noticed. A technician has been tasked to diagnose and troubleshoot the problem to make sure that no further service disruption will be experienced. The technician found that the LAN cable between the switches SW1 and SW2 is causing the problem and must be replaced. What would be the effect on the network if this cable is disconnected? THERE IS NO IMAGE ON THE QUESTION - PC1 WON'T BE ABLE TO COMMUNICATE IS THE CORRECT ANSWER!!!!
Communication between hosts on VLAN10 and VLAN20 would be disabled permanently
PC1 wont be able to communicate with the hosts on VLAN20 for a short period of time, communication on the network would then resume to its normal function
Hosts on VLAN20 would be able to communicate with each other and to the Router but wont be able to communicate with VLAN10
VLANs 10 and 20 will be able to communicate with each other but at a noticeably slower speed
As shown in the graphic, three switches are connected to each other. This could lead to bridging loops. However, by default, STP (Rapid PVST+) is enabled on every port. STP prevent switching/bridging loops (which allows the network to function normally, until the link between SW1 and SW2 has failed). If you disconnect the cable between SW1 and SW2, the network will experience access failure, after less than a minute however, the network would resume to its normal function. THERE IS NO IMAGE!!!!!!!
Study thousands of practice questions that organized by skills and ranked by difficulty.
Create a tailored training plan based on the knowledge you already possess.
Know when you’re ready for the high-stakes exam. Have the confidence that you will pass on your first attempt.