Are you studying for the CCENT or CCNA certifications?
Skillset can help you prepare! Sign up for your free Skillset account and take the first steps towards your certification.
Skillset can help you prepare! Sign up for your free Skillset account and take the first steps towards your certification.
Initially Branch1 Office's router has no static routes or routing protocols configured. What will happen with Branch Office 1 after it is configured with the line "Branch1(config)#ip route 10.10.10.0 255.255.254.0 10.10.3.2"?
The interface with IP 10.10.3.2 on the local router will forward all traffic to 10.10.10.0/23.
Branch Office 1 will function as a default gateway for network 10.10.10.0/23.
Traffic with source 10.10.10.0/23 will be forwarded to next hop 10.10.3.2.
Packets destined to network 10.10.10.0/23 are forwarded to next hop 10.10.3.2.
Configuration of a network through static routing is easy for a small network; however if the network grows it gets more complex. The command IP route "ip route [Destinationnetwork] [Mask] [Nexthopaddress or Exit interface] [Administrative Distance][Permanent]" describes how to manually add routes to the router's table. If you compare this command description to the line "Branch1(config)#ip route 10.10.10.0 255.255.254.0 10.10.3.2", as shown in the question, the first parameter (10.10.10.0) indicates the destination network, the next parameter (255.255.254.0) is the subnet mask and the last parameter (10.10.3.2) is the next hop address.
Study thousands of practice questions that organized by skills and ranked by difficulty.
Create a tailored training plan based on the knowledge you already possess.
Know when you’re ready for the high-stakes exam. Have the confidence that you will pass on your first attempt.