Skillset can help you prepare! Sign up for your free Skillset account and take the first steps towards your certification.
Refer to the exhibit. Two VLANs are correctly configured on a switch that is also connected to a router via FastEthernet0/12 with access mode enabled. The network administrator ensures that VLANs on the switch, as well as IEEE Encapsulation and IP addresses, are correctly configured on the router. However, a ping test between hosts from different VLANs are unsuccessful. It is suspected that a trunking configuration on the FastEthernet0/12 interface is causing the problem. Which of the following actions could be done to fix the problem?
***The exhibit is missing**** Answer: inside the interface configuration mode on the switch, enter the following commands: "switchport trunk encapsulation dot1q" then, "switchport mode trunk"
inside the interface configuration mode on the switch, enter the following commands: "switchport trunk encapsulation dot1q" then, "switchport mode trunk"
inside the interface configuration mode on the switch, enter the command: "switchport trunk encapsulation dot1q"
To fix the connectivity problem, enter the commands "switchport trunk encapsulation dot1q" and "switchport mode trunk" inside the FastEthernet0/12 interface on the switch. These commands will enable trunking mode on the FastEthernet0/12 interface replacing the "access mode" previously enabled and matches the encapsulation configured on the router (IEEE; 802.1Q). (http://www.cisco.com/c/en/us/support/docs/lan-switching/inter-vlan-routing/14976-50.html)
Study thousands of practice questions that organized by skills and ranked by difficulty.
Create a tailored training plan based on the knowledge you already possess.
Know when you’re ready for the high-stakes exam. Have the confidence that you will pass on your first attempt.